A4-80 Stainless Steel Cap Screws

A cap screw is defined as a screw or bolt with a cylindrical head containing an aperture for a hexagonal drive key (allen key) or torx drive.

Fastener Material Key
A2	A2 Stainless Steel - Also known as grade 304 or 18/8. A general purpose grade of stainless steel.
A4	A4 Stainless Steel - Also known as grade 316 or 18/8/3. A higher corrosion resistant, marine grade of stainless steel.
A4-80	A4-80 Stainless Steel - Identical corrosion resistance to A4-70 but with a higher tensile strength equivalent to that of 8.8 high tensile steel.
BO-10.9	Black Oxide High Tensile Steel Class 10.9 - A high tensile non-stainless grade with a black oxide finish offering limited corrosion resistance.
BO-12.9	Black Oxide High Tensile Steel Class 12.9 - A high tensile non-stainless grade with a black oxide finish offering limited corrosion resistance.
BZP	Bright Zinc Plated (BZP) Steel - Non-stainless standard steel grade offering a basic level of corrosion resistance.
BZP-12.9	Bright Zinc Plated (BZP) Class 12 High Tensile Steel - A higher tensile non-stainless grade for screws and bolts, with a basic level of corrosion resistance.
BZP-8.8	Bright Zinc Plated (BZP) Class 8 High Tensile Steel - The general purpose high tensile grade for screws and bolts, with a basic level of corrosion resistance.
Duplex	Duplex Stainless Steel 1.4462 - A type of stainless steel which has greater corrosion resistance than A4 / 316 and a high tensile strength of minimum 700 N/mm2. Also known as 318LN.
Nylon	Plastic (Nylon Polyamide) - A tough lightweight plastic, strong at low temperatures, with excellent resistance to chemicals, and features favourable sliding friction behaviour.
ZnFlk-12.9	Organic Zinc Flake Coated Class 12 High Tensile Steel - A higher tensile non-stainless grade for screws and bolts. Coated with superior mechanically applied zinc with corrosion resistance lasting 480 hours in the salt spray test.

less...

more...

Socket Head Cap Screws DIN 912 (ISO 4762) in A4-80 Stainless Steel

image chamfer for Socket Head Cap Screws DIN 912 (ISO 4762)

Socket Head Cap Screws DIN 912 (ISO 4762) in A4-80 Stainless Steel

Also known as an Allen screw or Allen bolt, or simply a cap screw. Socket Head Cap screws are a more modern alternative standard machine fastener to the standard hexagon headed bolt or setscrew, as found on much modern machinery. A hex key (otherwise known as an Allen key) is required to fit these fasteners. Conforming to DIN 912 or ISO 4762. Please note that due to manufacturing limitations, all nylon variants of these items are only "similar to" and not "in absolute accordance with" the standard specified.

A4-80

Socket Head Cap Screws With Fine Thread DIN 912 (ISO 4762) in A4-80 Stainless Steel

image chamfer for Socket Head Cap Screws With Fine Thread DIN 912 (ISO 4762)

Socket Head Cap Screws With Fine Thread DIN 912 (ISO 4762) in A4-80 Stainless Steel

Fine pitch screws are used in conjunction with a fine pitch threaded hole, or with fine pitch nuts which are also available on this website. The extra thread engagement gained from the finer pitch gives a more secure and stronger fitment. Used where high levels of strength are required - a fine pitch bolt has a larger stress area creating better tension than its coarse pitch counterpart, also they are less inclined to loosening through vibration due to the thread incline being smaller.

A4-80

Top