Stainless Steel (1.4122) Pins, Clips and Rivets

Our range of non threaded fasteners includes Dowel Pins, Split Pins, R-Clips, Pop Rivets, Roll Pins, Clevis Pins and Lynch Pins. All designed to be used with pre-drilled or reamed holes to ensure a safe and solid union. R-Clips can be re-used and are easier to fit and remove. Cotter Pins are more usually single use items as they are bent during fitment and removal which weakens the metal.

< View all Pins, Clips and Rivets

Roll Pins

R Clips

Split Pins

Blind Rivets

Fastener Material Key
A1	A1 Stainless Steel - Also known as grade 303. A general purpose grade of stainless steel but with better fabrication/machining properties than grade 304.
A2	A2 Stainless Steel - Also known as grade 304 or 18/8. A general purpose grade of stainless steel.
A4	A4 Stainless Steel - Also known as grade 316 or 18/8/3. A higher corrosion resistant, marine grade of stainless steel.
Alum Blk	Black Coated Aluminium - Black coated lightweight aluminium, with a steel mandrel.
Alum Pln	Plain Aluminium - Typically for blind rivets, plain, unpainted lightweight aluminium, with a steel mandrel.
Alum Wht	White Coated Aluminium - White coated lightweight aluminium, with a steel mandrel.
Copper	Copper Alloy - Copper has good corrosion resistance and high tensile strength, allowing it to withstand high-pressure and high temperature conditions. It is a highly ductile and malleable material, enabling copper washers to create tighter seals and withstand vibration better than steel. Copper also provides excellent thermal and electrical conductivity.
SS1.4122	Stainless Steel (1.4122) - A martensitic grade of stainless steel, offering increased hardness and wear resistance over the more common austenitic grades 304 and 316.
SS301	301 Stainless Steel - More elastic stainless steel grade used for springs and parts that require some higher strength.

less...

more...

External Circlips to DIN 471 in Stainless Steel (1.4122)

image chamfer for External Circlips to DIN 471

External Circlips to DIN 471 in Stainless Steel (1.4122)

External circlips are also known as retaining rings for shafts or C-clips. Made from spring or stainless steel, circlips are clipped into place using specific circlip pliers or a taper. On a shaft, circlips are used to lock components such as gears, pulleys and bearings into place. These circlips are designed to fit into a groove cut to a specific size on a shaft.

SS1.4122

Internal Circlips to DIN 472 in Stainless Steel (1.4122)

image chamfer for Internal Circlips to DIN 472

Internal Circlips to DIN 472 in Stainless Steel (1.4122)

Internal circlips are also known as retaining rings for bores. Made from spring or stainless steel, internal circlips are used to retain components such as bearings into place within the bore. Internal circlips are located into a groove of a certain depth within the bore hole.

SS1.4122

Top