Westfield Fasteners Ltd Logo
Westfield Fasteners Ltd Telephone: 01844201133, Email: enquiries@westfieldfasteners.co.uk
Home   /   Pins, Clips and Rivets   /   1.2mm diameter Cotter Split Pins (DIN 94) in A2 Stainless Steel

1.2mm diameter Cotter Split Pins (DIN 94) in A2 Stainless Steel

Cotter Pins, also known as Split Pins are designed to be inserted through a hole and bent to secure in place, they are commonly made from wire which is semi-circular in cross section and square cut at the end, other specialist end finishes include Mitre or Bevel. Lengths are measured from the end of the tines to the point the base of the eyelet hole contacts with the host material. An unthreaded fastener solution for single use, as bending fatigue can cause failure if re-used.
Cotter Split Pins (DIN 94) in A2 image
technical drawing of Cotter Split Pins (DIN 94)
Technical Summary
d nom. nominal diameter 1.2
d max. maximum diameter 1.0
d min. minimum diameter 0.7
A max. max. dimension 2.5
A min. min. dimension 1.25
B approx. dimension approx. 3.0
C max. max. dimension 2.0
C min. min. dimension 1.7
Standard DIN 94
all dimensions in millimetres (mm)
Datasheet
< View All Sizes
Description Sale Qtys Qty Price Breakdown Despatch Estimate
1.2 x 6mm Split Pin (Cotter Pin) in A2 Stainless
WF49109
£0.00
1.2 x 8mm Split Pin (Cotter Pin) in A2 Stainless
WF49110
£0.00
1.2 x 10mm Split Pin (Cotter Pin) in A2 Stainless
WF49097
£0.00
1.2 x 12mm Split Pin (Cotter Pin) in A2 Stainless
WF49098
£0.00
1.2 x 16mm Split Pin (Cotter Pin) in A2 Stainless
WF49099
£0.00
1.2 x 18mm Split Pin (Cotter Pin) in A2 Stainless
WF49100
£0.00
1.2 x 20mm Split Pin (Cotter Pin) in A2 Stainless
WF49101
£0.00
1.2 x 22mm Split Pin (Cotter Pin) in A2 Stainless
WF49102
£0.00
1.2 x 25mm Split Pin (Cotter Pin) in A2 Stainless
WF49103
£0.00
1.2 x 28mm Split Pin (Cotter Pin) in A2 Stainless
WF49104
£0.00
1.2 x 32mm Split Pin (Cotter Pin) in A2 Stainless
WF49105
£0.00
1.2 x 36mm Split Pin (Cotter Pin) in A2 Stainless
WF49106
£0.00
1.2 x 40mm Split Pin (Cotter Pin) in A2 Stainless
WF49107
£0.00
1.2 x 45mm Split Pin (Cotter Pin) in A2 Stainless
WF49108
£0.00
Prices are subject to quantity discounts based on a sliding scale. Enter the desired quantity in the relevant box in the table above. This will automatically calculate a line price indicating the applicable rate for the quantities selected. All prices shown exclude VAT.
technical drawing of Cotter Split Pins (DIN 94)
Technical Summary
d nom. nominal diameter 1.2
d max. maximum diameter 1.0
d min. minimum diameter 0.7
A max. max. dimension 2.5
A min. min. dimension 1.25
B approx. dimension approx. 3.0
C max. max. dimension 2.0
C min. min. dimension 1.7
Standard DIN 94
all dimensions in millimetres (mm)
Datasheet
FSB logo CBI logo