Westfield Fasteners Ltd Logo
Westfield Fasteners Ltd Telephone: 01844201133, Email: enquiries@westfieldfasteners.co.uk
Home   /   Bolts and Machine Screws - Metric   /   M5 Torx Cap Screws With Low Head ISO 14580 or DIN 7984 in A2 Stainless Steel

M5 Torx Cap Screws With Low Head ISO 14580 or DIN 7984 in A2 Stainless Steel

Similar to the DIN 912 torx cap screw but with a lower head height and smaller Torx Key (6 lobe drive), the ISO 14580 (DIN 7984) is used where space is limited. This range is generally manufactured with a partial thread beyond a certain length and nominal diameter combination, but occasionally some stock may include a fully threaded shank at the same combination.
Torx Cap Screws With Low Head ISO 14580 or DIN 7984 in A2 image
technical drawing of Torx Cap Screws With Low Head ISO 14580 or DIN 7984
Technical Summary
d nominal diameter M5
thread pitch thread pitch 0.80
dk head diameter 8.5
k head height 3.65
t min. minimum recess depth 1.52
t max. maximum recess depth 1.91
b minimum thread length 16
s drive size T 25
Standard ISO 14580 (DIN 7984)
all dimensions in millimetres (mm)
Datasheet
< View All Sizes
Prices are subject to quantity discounts based on a sliding scale. Enter the desired quantity in the relevant box in the table above. This will automatically calculate a line price indicating the applicable rate for the quantities selected. All prices shown exclude VAT.
technical drawing of Torx Cap Screws With Low Head ISO 14580 or DIN 7984
Technical Summary
d nominal diameter M5
thread pitch thread pitch 0.80
dk head diameter 8.5
k head height 3.65
t min. minimum recess depth 1.52
t max. maximum recess depth 1.91
b minimum thread length 16
s drive size T 25
Standard ISO 14580 (DIN 7984)
all dimensions in millimetres (mm)
Datasheet
FSB logo CBI logo