Westfield Fasteners Ltd Logo
Westfield Fasteners Ltd Telephone: 01844201133, Email: enquiries@westfieldfasteners.co.uk
Home   /   Bolts and Machine Screws - Metric   /   M16 x 50 Hex Bolt Part Thread in Duplex 1.4462 Stainless - DIN 931

M16 x 50 Hex Bolt Part Thread in Duplex 1.4462 Stainless - DIN 931

The most common type of fastener, a hex head bolt is designed to be tightened with a standard spanner or ratchet and socket. Popularly used in all assemblies, a standard hex bolt is a staple across the world. Manufactured to ISO 4014 or DIN 931, and therefore includes an unthreaded section of the shaft. A hex drive permits a greater torque load to be applied to the joint over most other drive types. Please note that due to manufacturing limitations, all nylon variants of these items are only "similar to" and not "in absolute accordance with" the standard specified.
Hex Head Bolts DIN 931 (ISO 4014) in Duplex image
technical drawing of Hex Head Bolts DIN 931 (ISO 4014)
Technical Summary
d nominal diameter M16
thread pitch thread pitch 2.00
b min. <= 125 min. thread (bolt lengths <= 125) 38
b min. > 125, <=200 min. thread (bolt lengths > 125 , <= 200) 44
b min. > 200 min. thread (bolt lengths > 200) 57
s drive size 24
k min. minimum head height 9.82
e width across corners 26.75
Standard DIN 931
all dimensions in millimetres (mm)
html graphic DIN 931 Standard HTML
pdf graphic DIN 931 Standard PDF
< View Other Lengths
Description Sale Qtys Qty Price Breakdown Despatch Estimate
M16 x 50 Hex Bolt Part Thread in Duplex 1.4462 Stainless
WF59186
£8.50
M16 x 50 Hex Bolt Part Thread in Duplex 1.4462 Stainless   WF59186
£8.50
Prices are subject to quantity discounts based on a sliding scale. Enter the desired quantity in the relevant box in the table above. This will automatically calculate a line price indicating the applicable rate for the quantities selected. All prices shown exclude VAT.
technical drawing of Hex Head Bolts DIN 931 (ISO 4014)
Technical Summary
d nominal diameter M16
thread pitch thread pitch 2.00
b min. <= 125 min. thread (bolt lengths <= 125) 38
b min. > 125, <=200 min. thread (bolt lengths > 125 , <= 200) 44
b min. > 200 min. thread (bolt lengths > 200) 57
s drive size 24
k min. minimum head height 9.82
e width across corners 26.75
Standard DIN 931
all dimensions in millimetres (mm)
html graphic DIN 931 Standard HTML
pdf graphic DIN 931 Standard PDF
FSB logo CBI logo